The AM-15 Optic Ready, 6.5 Grendel 16" - M4 is our Entry Level Rifle. By manufacturing all our parts here at Anderson Manufacturing in Hebron, Kentucky, we are able to offer you Affordable, American Made, Quality for Less! The Optic Ready Rifle is a high quality rifle for a low cost. Just add an optic of your choice and you are ready to take on range day!
This Rifle is assembled with the highest of quality Anderson Manufacturing machined parts. Built by Anderson Manufacturing Armorers with the following parts: AM-15 Stripped Lower Receiver; Lower Parts Kit - Stainless Steel; AM-15 Buttstock - Anderson M4; AM-15 Buffer Tube, 6 Position - Carbine Length; AM-15 Buffer Tube Castle Nut; AM-15 Buffer, Carbine Length; AM-15 Buffer Spring - Carbine Length; AM-15 Receiver End Plate - Ambi; 6.5 Grendel 16" M4 Barrel - Carbine Length; AM-15 Stripped Upper Receiver; AM-15 Bolt Carrier Group - 6.5 Grendel; AM-15 Charging Handle - Standard; AM-15 Gas Block, Standard - .750; With Picatinny, AM-15 Gas Tube - Carbine Length; AM-15 Flash Hider, A2 Kit - 5.56; AM-15 Hand Guard, A2 Style - Carbine Length; AM-15 Upper Parts Kit; A2 Barrel Nut Kit; Hand Guard Cap - M4.
The AM-15 Lower Receiver is American made with superior quality for less! Our lower Receivers are CNC machined from a high-strength, 7075 T6 aluminum forging for reliable performance and outstanding durability. Machined to Military Specifications & Standards and marked "Multi-Cal " to be used with multiple calibers on the AR-15 platform. This Lower Receiver comes in type III black hard anodize, and an Open Trigger.
The AM-15 Lower Parts Kit includes the following: Bolt Catch, Bolt Catch Plunger, Bolt Catch Roll Pin, Bolt Catch Spring, Buffer Retainer, Buffer Retainer Spring, Disconnect, Disconnect Spring, Hammer,Hammer Pin, Hammer Spring, Magazine Catch, Magazine Catch Button, Magazine Catch Spring, Pistol Grip (A2 style), Pistol Grip Lock Washer, Pistol Grip Screw, Pivot Pin, Pivot Pin Detent, Pivot Pin Detent Spring, Selector, Selector Detent, Selector Detent Spring, Takedown Pin, Takedown Pin Detent, Takedown Pin, Detent Spring, Trigger, Trigger Guard, Trigger Guard Roll Pin, Trigger Pin, Trigger Spring
The AM-15 Buttstock - Anderson M4 is a M4 style Six Position Butt Stock. Black in color and mil spec diameter.
The 6 Position Buffer Tube is Finished in Black Anodize, and made from 7075 T6 Aluminum.
The buffer tube castle nut is the standard AR-15 buffer tube nut.
The Carbine Length, Standard Buffer & Music Wire Type Buffer Spring
The Am-15 Mil Spec, Ambidextrous Receiver End Plate has two Sling Holes and comes with a Parkerized Finish.
The AM-15 Stripped Upper Receiver is machined from 7075 T6 Aluminum forging. Featuring M4 feed ramps, this upper receiver is machined to Military Specifications & Standards and can be used with multiple calibers on the AR-15 platform. This upper receiver comes in type III hard coat black anodize.
The AM-15 Upper Receiver Parts Kit includes the following: Ejection Port Cover Assembly, and Forward Assist Assembly.
The 16" 6.5 Grendel, Type 2 M4 barrel is made from 4150 Chrome Moly Vanadium Steel with a Parkerized finish. Featuring a carbine length gas system with a .750" gas port and a 1:8 twist, this barrel provides top accuracy and precision for your rifle.
The A2 Flash Hider Kit comes with a crush washer. The thread for this flash hider is 1/2 x 28.
The 6.5 Grendel Complete Bolt and Carrier Group is Nitride coated and Chrome Lined. The Carrier is made from 8620 steel, and the Bolt is made from 9310 steel and Nitride coated, MPI Tested. The 6.5 Grendel Bolt and Bolt Carrier Assembly comes complete with Cam Pin, Firing Pin and Firing Pin Retainer.
The AM-15 Charging handle is the standard AR-15 charging handle.
The AM-15 Gas Block Assembly is lower than the rail on the Upper Receiver. This Gas Block is made from 6061 T6 aluminum. the gas block is paired with an AM-15 Carbine Length Gas Tube with a length of 9.75", and is made from 304 Stainless Steel.
The A2 Style Hand Guard Kit Includes: 2 piece Carbine length forearm, Delta Ring, Snap Ring, A2 Barrel Nut and Weldon Spring, and the M4 Hand Guard Cap.
Please Note: Shooting this ammo Voids Warranty
PRODUCT SAFETY AND RECALL NOTICE FOR 6.5 GRENDEL AMMUNITION
Prvi Partizan ( "PPU "), the manufacturer, is recalling all 6.5 Grendel ammunition.
This recall applies to ALL 6.5 Grendel ammunition. DO NOT USE OR SELL THE FOLLOWING PRODUCTS:
PP6.30 6.5 Grendel FMJBT 110gr
PP6.31 6.5 Grendel HPBT 120gr
Because of different chamber sizes in certain rifles, 6.5 Grendel cartridges may be subjected to excessive chamber pressure.
Use of these products may result in firearm damage and possible serious personal injury.
If you have any 6.5 Grendel ammunition or brass manufactured by PPU, please call (203) 375-8544 to firstname.lastname@example.org arrange for its return and replacement.
We apologize for any inconvenience.
TR&Z USA Trading Corporation
A Federal Firearms License (FFL) is required to purchase this item.
Email your FFL for transfer to FFL@andersonmanufacturing.com
|Federal Firearm License Required for Purchase||Yes|
|Country of Manufacture||United States|
|Unit of Measure||EA|