By manufacturing all our parts here at Anderson Manufacturing in Hebron, Kentucky, we are able to offer you Affordable, American Made, Quality for Less! The AM-15 Pistol is a high quality Pistol for a low cost. Just add an optic of your choice and you are ready to take on range day!
Built by Anderson Manufacturing Armorers with the following parts:
- AM-15 Stripped Lower Receiver
- Magpul Lower Parts Kit - Stainless Steel
- AM-15 Buffer Tube - Pistol Length
- AM-15 Buffer Tube Castle Nut
- AM-15 Buffer, Carbine Length
- AM-15 Buffer Spring - Carbine Length
- AM-15 Receiver End Plate
- .300 Blackout 10.5" Heavy Barrel - Pistol Length
- AM-15 Stripped Upper Receiver
- AM-15 Bold Carrier Group, 5.56
- AM-15 Charging Handle - Standard
- AM-15 Gas Block, Low Profile Steel - .750
- AM-15 Gas Tube - Pistol Length
- Flash Hider, Knight Stalker - 5.56/.223
- AM-15 Upper Parts Kit
- AM-15 Free Float Kit, EXT - 9"
The AM-15 Lower Receiver is American made with superior quality for less! Our lower Receivers are CNC machined from a high-strength, 7075 T6 aluminum forging for reliable performance and outstanding durability. Machined to Military Specifications & Standards and marked "Multi-Cal " to be used with multiple calibers on the AR-15 platform. This Lower Receiver comes in type III black hard anodize, and an Open Trigger.
The Magpul Lower Parts Kit for AM-15 includes the following:
- Bolt Catch (1), Bolt Catch Plunger (1), Bolt Catch Roll Pin (1), Bolt Catch Spring (1)
- Buffer Retainer (1), Buffer Retainer Spring (1)
- Magazine Catch (1), Magazine Catch Button (1), Magazine Catch Spring (1)
- Pivot Pin (1), Pivot/Takedown Pin Detent (2), Pivot/Takedown Pin Detent Spring (2)
- Safety Selector (1), Safety Selector Detent (1), Safety Selector Detent Spring (1)
- Takedown Pin (1)
- Trigger Guard (1), Trigger Guard Roll Pin (1)
- Magpul MOE Pistol Grip (1), Pistol Grip Lock Washer (1), Pistol Grip Screw (1)
- Stainless Steel Trigger (1), Stainless Steel Hammer (1), Trigger/Hammer Pins (2)Disconnect (1), Disconnect Spring (1), Trigger Spring (1), Hammer Spring (1).
The Pistol Buffer Tube is Finished in Black Anodize, and made from 7075 T6 Aluminum.
The buffer tube castle nut is the standard AR-15 buffer tube nut.
The Carbine Length, Standard Buffer & Music Wire Type Buffer Spring
The Am-15 Mil Spec Receiver End Plate has no Sling Holes and comes with a Parkerized Finish.
The AM-15 Stripped Upper Receiver is machined from a 7075 T6 Aluminum forging. Featuring M4 feed ramps, this upper receiver is machined to Military Specifications & Standards and can be used with multiple calibers on the AR-15 platform. This upper receiver comes in type III hard coat black anodize.
The AM-15 Upper Receiver Parts Kit includes the following: Ejection Port Cover Assembly, and Forward Assist Assembly.
The 10.5" .300 Blackout Heavy barrel is made from 4150 Chrome Moly Vanadium Steel with a Parkerized finish. Featuring a pistol length gas system with a .750" gas port and a 1:8 twist, this barrel provides top accuracy and precision for your .300 Blackout rifle.
The Knight Stalker Flash Hider reduces barrel rise for fast accurate follow up shots, and significantly cuts flash down for fast target acquisition.
The AM-15 Bolt Carrier Group - .223 Complete Bolt and Carrier Group is Phosphate coated and Chrome Lined. The Carrier is made from 8620 steel, and the Bolt is made from 9310 steel and Phosphate coated, MPI Tested. The 223 Bolt and Bolt Carrier Assembly comes complete with Cam Pin, Firing Pin and Firing Pin Retainer.
The AM-15 Charging handle is the standard AR-15 charging handle.
The AM-15 Low Profile Gas Block Assembly is intended to fit underneath free floats. This Gas Block is made from 12L14 Steel and is compatible with a .750 dia Barrel. Nitrite finish with laser engraved with the Anderson Manufacturing Logo on one side. The gas block is paired with an AM-15 Pistol Length Gas Tube with a length of 6.75", and is made from 304 Stainless Steel.
The EXT Carbine Length Free Float Kit provides ultimate strength and durability while also providing comfort and functionality. The Length of this free float is 9.4" Featuring continuous top picatinny rail and bottom and sides designed to accept picatinny rails. Also featuring integral sling swivel attachment points. Made from 6061-T6 Aluminum, and finished to Mil Spec with type III Hard Coat Anodizing. This Kit includes a steel barrel nut (1 1/4"-18 thread), 3 allen head bolts, and two quick disconnects for forearm. The EXT series comes in Pistol, Carbine, Mid, and Rifle Lengths allowing it to fit the needs of your AR-15 build. Will need the AM15 Barrel Nut Wrench.
A Federal Firearms License (FFL) is required to purchase this item.
Email your FFL for transfer to FFL@andersonmanufacturing.com
|Federal Firearm License Required for Purchase||Yes|
|Country of Manufacture||United States|
|Unit of Measure||EA|